The CRP1 clean-room panel is characterised by its compact construction and simple handling. Its HygroClip2-compatibility allows humidity to be registered to the highest degree of accuracy. Depending on demand and application any other Rotronic probe might be connected. The data can be transferred via analog outputs or MODBUS. Measured values, alarms and measurement curves are shown on the display.
Features:
Monitors humidity, temperature and low dew point
Designed specifically for clean rooms
Works in combination with the HygroClip2-series but also with any other Rotronic probe (customized to your needs)
FDA- and GAMP-compatible
Digital communication via MODBUS RTU / HW4
Analog output signals freely configurable
Stainless steel front panel highly resistant to chemicals
Alarm output acoustic, or via relay or LCD display
Simple probe calibration outside the room being monitored
The CRP1 clean-room panel is the obvious choice wherever precise measurement of humidity and temperature is of vital importance, and a high degree of cleanliness must be maintained. Such as clean rooms in hospitals, in the pharmaceutical, electronics or foodstuffs industries and other applications in which humidity and temperature are monitored. The comprehensive functional capabilities of the CRP1 can be used for many measurement and control tasks.
In combination with the Rotronic HC2-LDP probe the CRP1 specially meets the requirements of monitoring dry air in compressed-air equipment and battery fabrication.
CRP1洁净室面板的结构紧凑，操作简单。 其HygroClip2可以以相当高准确度记录湿度。 数据可以通过模拟输出或MODBUS传输。 测量值，报警和测量曲线显示在显示屏上。
应用
洁净室面板CRP1是精确测量温湿度的相当佳选择，必须保持高度的清洁度。 医院，制药，电子或食品行业的洁净室以及监测湿度和温度的应用。 CRP1的功能非常全面，可用于许多测量和控制任务。
特点
墙表面内置安装，不锈钢面板，无积尘结构设计
支持湿度、温度和露点测量
与HygroClip2系列配合使用
符合FDA- 和 GAMP
通过MODBUS RTU / HW4进行数字通讯
模拟输出信号可自由配置
不锈钢前面板高度耐化学品
报警声音输出，或通过继电器或LCD显示
